Short answer: diamond grades are the four scales an independent laboratory uses to describe every diamond: colour, clarity, cut and carat weight. All four appear on the grading report from a laboratory such as GIA or IGI, and together they decide how a diamond looks and what it costs.
Below are the full scales, what actually matters when you buy, and the grades we use for VYKA diamonds.
Diamond colour grades: D to Z
The colour of a white diamond is graded from D, with no colour at all, to Z, with a clear yellow or brown tint. The closer a grade is to D, the rarer and more expensive the diamond. (GIA colour scale)
| Grades | Name | How it looks once set |
|---|---|---|
| D, E, F | Colourless | Completely white |
| G, H, I, J | Near-colourless | White to the eye in most settings |
| K, L, M | Faint | A visible warmth, most of all in white gold |
| N to R | Very light | A noticeable tint |
| S to Z | Light | A clear yellow or brown tint |
The step between neighbouring grades is very small and is judged face-down against master stones under laboratory light. In yellow or rose gold the metal warms the diamond anyway, so the difference between grades matters even less. Elongated shapes such as oval and pear show colour a little more than a round diamond of the same grade.
Diamond clarity grades: FL to I3
Clarity measures the inclusions inside a diamond and the blemishes on its surface, as seen under 10x magnification. There are 11 grades. (GIA clarity scale) The table below works as a diamond clarity chart, listing the grades in order from flawless to included.
| Grades | Name | What it means |
|---|---|---|
| FL | Flawless | No inclusions or blemishes under 10x |
| IF | Internally flawless | No inclusions under 10x |
| VVS1, VVS2 | Very, very slightly included | Inclusions very hard to see even under 10x |
| VS1, VS2 | Very slightly included | Minor inclusions, hard to see under 10x |
| SI1, SI2 | Slightly included | Inclusions visible under 10x; some SI2 stones show them to the eye |
| I1, I2, I3 | Included | Inclusions visible to the naked eye |
What matters when you buy is whether a diamond is eye-clean, meaning no inclusion shows without a loupe. Most VS diamonds, and many SI1 rounds, are eye-clean. Emerald and Asscher cuts show the inside of the stone clearly, so they need VS1 or better.
Cut: what makes a diamond sparkle
The cut grade measures how well a diamond is proportioned, symmetrical and polished, which decides how much light it returns to the eye. GIA gives round brilliants one of five cut grades: Excellent, Very Good, Good, Fair and Poor. Cut matters most for sparkle: a diamond with middling colour and clarity and an excellent cut looks better than a higher-graded diamond that is poorly cut. Other shapes carry no standard cut grade, so they are judged on video and on their measurements.
Carat weight
The carat is the unit of weight for diamonds. One carat is 0.2 grams, so one gram is five carats, and a carat is divided into 100 points: a 0.50-carat diamond is a "50-pointer". Price rises faster than weight, because large diamonds are rarer: a two-carat diamond costs well over twice a one-carat diamond of the same grades. For prices by size, see how much a 1 carat diamond costs and our diamond price per gram page.
The grades we use at VYKA
Most of the centre stones in our rings are colourless to near-colourless and VS1 to SI1 in clarity, and every one is certified by an independent laboratory such as GIA or IGI. The report comes with the piece, its number can be checked on the laboratory's own website, and any report can be scored on our diamond quality checker.
Diamond grade questions
What does SI mean in diamonds?
SI stands for "slightly included", and it has two grades, SI1 and SI2. Both have inclusions you can see under 10x magnification. Many SI1 rounds are eye-clean, while some SI2 inclusions can be seen with the naked eye.
Which diamond colour is the most expensive?
Among white diamonds, D is the most expensive because it is the rarest. Outside that scale, natural diamonds with strong colours such as pink, blue and red are among the rarest and most valuable stones in the world.
What is the highest clarity grade?
FL, flawless: no inclusions or surface blemishes under 10x magnification. IF, internally flawless, comes next. Both are very rare, and neither looks different from VVS to the eye.
What is the difference between VS and SI diamonds?
In a VS diamond the inclusions are minor and hard to see even under 10x; in an SI diamond they are easier to see under 10x. To the eye, a VS round and most SI1 rounds look the same, and the bigger difference is the price.
For shapes, see our guide to diamond shapes; for the report itself, GIA vs IGI; and for a worked example, is H VS2 a good diamond?